Rurouni kenshin seaweed art

Tags

anime bento, bento, character bentos, cheese, creative food, cute food, food art, himura kenshin, Home Cooking, Kyaraben, rurouni kenshin, samurai x, seaweed, seaweed art

Another seaweed art I did over the long weekend. I’ve been wanting to do a rurouni kenshin one for over a year now and finally have some free time to stay home and mess around with seaweed. Perfect time for rurouni kenshin as two of the movies are out this year!  

 First step? Again, draw the character of your choice, it should be either a line art or just black and white, not grey tones or anything cuz you can’t distinguish that in the seaweed.

2nd, I skipped this step because I plain forgot… trace out your character on a clean sheet of paper using ink, then block the black parts in. Since I forgot, I just used this as a topper and didn’t eat it (couldn’t bear to anyway!). OR you can combine the first and second step by just printing out the lineart/black and white image of your choice and just use that if you’re not particularly comfortable with drawing freehand.

 3. Next, prepare your tools! My brother and sister got me a new set of bento cutting tools (a great design cutter!) and pincers since my older set is in Singapore. Clip the drawing on top of the seaweed against the cutting board.

 4. Start cutting all the WHITE parts out! This is a particularly intricate piece and had many tiny details. I accidentally cut out some seaweed lines which could have been rectified by snipping small lines of seaweed, but of course by the end of it I just couldn’t be bothered anymore.

5. Cut the small white pieces first. If you cut out the large pieces, the seaweed will shift around and make it impossible to cut the tiny ones. Use pincers to remove the paper and seaweed as you go along.

 Phew! There’s the face done.

Once in a while, flip up the paper to have a look if your seaweed is being cut cleanly and properly.

And you’re done!

Transfer the seaweed careful and stick it on a slice or two of cheese. I might try a harder cheese next time so it is easier to handle, but this cheese is sticky and the seaweed sticks very well onto it.

 6. Cut the cheese and trim it around the seaweed.

 7. Add to your bento! Or in this case, tomato soup. One of the many ways to jazz up boring canned soup. 

Although some croutons wouldn’t hurt as well!

 It was so difficult to photograph as the light kept shining off it! I wish I had daylight to take a proper photo of it.

Advertisement

Rurouni kenshin seaweed art – Coming soon!

Tags

anime, bento, bento art, character bento, cute bentos, himura kenshin, kenshin, Kyaraben, rurouni kenshin, seaweed, seaweed art, tomato soup

Bento assortment: Pandas and strange creatures galore!

Tags

bento, character bento, eggs, furikake, Home Cooking, japanese, Kyaraben, lunch, lunchbox, onigiri, panda onigiri, rice, sausages, seaweed

Never knew that bento-making could be made into a fun bonding session with friends 😉 At my age, bonding/get-togethers normally mean just meals or drinks so I was a little apprehensive at first. As it turned out, it was pretty entertaining!

We used several items, as I’ll list out below, to assemble our bentos. They may not be perfect but I think its the experience that counts ;D

This is just a short picture post as there aren’t any instructions… just do whatever you like and go crazy with your food!

Tools used:

• Cute and colourful picks
• Panda rice mold
• Seaweed cutters (panda shaped and various smileys)
• Small knife
• Small scissors
• Tweezers

Food used:

• Plain white cooked short grain rice
• cooked white short grain rice mixed with salmon furikake topping
• An assortment of fruits
• Shiso leaves
• Cheese slices
• Cocktail sausages
• Furikake
• Boiled eggs
• Wasabi peas
• Seaweed

So here’s my bento, the pandas, the failed hatched chick and cheese swirls:

Below are the bentos my two friends came up with.

I’m now all revved up to make cuter bentos soon! Its a nice change to seaweed art, but of course I won’t abandon that either. I’ve yet to make Rurouni kenshin bentos!

Deconstructed bibimbap bento

Tags

bento, bibimbap, breakfast, character bento, character bentos, cute, deconstructed, easy bento, food art, healthy, Home Cooking, Korean, Kyaraben, lunch, lunchbox, panda character bentos, vegetables

Tamagoyaki / Dashimaki Tamago (Egg Roll)

Tags

bento, dashi, dashimaki tamago, Egg, egg roll, healthy, japanese, mirin, sake, tamago, tamagoyaki

The above picture is from my 2nd attempt at making tamagoyaki. Its a pretty common food in Japanese and Korean cuisine. Perhaps the only difference is that the Koreans don’t make it with sugar, dashi or sake. Of course, the Japanese tamagoyaki has both sweet and savory versions but I prefer the sweet version. While it is helpful to have a rectangular pan for this recipe, it is not necessary. You can make tamagoyaki using a normal frying pan.

For my first attempt, I made tamagoyaki using only 3 eggs and using a low fire. Not only did I have to wait a longer time for the egg to cook, but the egg roll came out kinda small, flat and not as fluffy. It was worse when it got cold and shrank further in size T___T. I poured in only enough egg to cover the surface for the first round but this was a mistake in my opinion.

In my 2nd attempt, I used 5 eggs on medium-high heat in a smaller and deeper frying pan. I poured in half the eggs for the first round of cooking and that made the egg roll fluffier. The end result? Thick egg rolls!!! ❤

Other than that generally the cooking methodology is still similar, which is why I’m including my first attempt here as well.

Ingredients

• 5 eggs
• 1-1.5 tbsp sugar
• 5 tbsp water or dashi
• 1 tsp salt (more or less depending on how salty the dashi is)
• 1 tsp mirin
• 1 tsp sake

You will need some kitchen paper for oiling the pan after each round of frying as well.

Instructions

Combine the dashi/water, sugar, mirin, salt and sake into a bowl. Mix thoroughly.

Break the eggs into the bowl with the dashi mixture and beat to just combine but do not overly beat it as we want some egg white bits in the tamagoyaki. Run a chopstick a few times through the mixture to ensure that the eggs are broken up and can be poured easily.

Keep a bowl of oil with kitchen towel next to the pan. You will use this to continuously oil the pan after each round of cooking.

Oil the pan and heat it up on medium-high flame.

Pour in half the eggs.

Scramble it a little. Fold over when the bottom is set enough to flip it over. Oil the exposed side of the pan, and then gently push the “omelette” to the side of the pan. Oil the rest of the pan before adding more egg. This time add just enough egg to cover the pan.

Above, I’ve already pushed the first layer of egg to the side and added the 2nd thinner layer. Lift the first “Omelette” so that the second layer of egg goes underneath to coat the entire pan. See those bubbles forming? Pop them!

Hehehe! Once this layer is more or less set, flip the thicker part onto the thin layer. This would create the “roll” layer. Again, oil the exposed part of the pan, push the egg to that side and oil the rest of the pan. Then add another layer of egg. Continue the process until all the egg is used up.

The last bit of egg… and you’re done! Brown the outsides if you like but don’t overdo it. If you want to shape the tamagoyaki into something more rectangular/oval you can make use of a sushi mat, but you have to shape it when it’s still hot.

Lastly, slice the tamagoyaki and serve 😉

I did not shape the tamagoyaki so the shape of it has a mind of its own T___T

I’m also going to add pictures from my first attempt. You can see that the heat is lower and the pan is bigger. So I “rolled” the egg several times and pushed the egg to the middle instead of the very end.

Waiting for the egg to cook before flipping the roll towards the left.

Above, after pushing the roll to the middle, I added another layer of egg. 

Continue the process…

Finally done.

Now to cut it!

As you can see, the roll isn’t very thick. Also, it shrank after it cooled and wasn’t as fluffy. Which is why I prefer the first method of cooking on medium high heat and in a smaller pan. Cooking half the eggs and scrambling them in the first round saves time and also makes the eggs fluffy. So try it yourself and see which way works well for you.

I’ll leave you with some youtube links on making tamagoyaki :-

Enjoy!

 

 

 

Crayon Shin Chan Kyaraben

Tags

apple, apple designs, bento, character bento, Crayon Shin-chan, cutters, easy, flower shaped apples, food art, furikake, Home Cooking, Kyaraben, lunchbox, nori, quick, salmon furikake, seaweed, seaweed art, shin chan

Here’s an easy kyaraben (Character bento) that you could attempt. This anime character is Shin Chan, one of the many anime characters that bring back a wave of university nostalgia. For the list of tools used, please refer to my first bento post.To make Shin Chan’s face, I used some rice mixed with Salmon furikake (to make the flesh tone). I couldn’t find a furikake that had no seaweed in it so unfortunately my flesh tone had little specks of seaweed in them T___T. It turned out ok in the end though.

For the hair, eyes and eyebrows I cut out strips of seaweed using a sharp design cutter as shown in my first bento post.

As usual, I drew my design on paper, just to make the face fit in with the other food I wanted to put into my bento. Using this design as a template, you can then cut out the hair, eyes and eyebrows by clipping the paper on top of a sheet of nori on a cutting board as shown in the pictures below.  

So the sequence is: Paper, seaweed and then cutting board. All fastened together to make it easier to cut out the delicate pieces of seaweed. Then you mix your Salmon furikake into the rice, place it into the bento box and shape it into the form that you’ve drawn in the design, roughly in the same size as accurately as possible. Then add the seaweed hair, eyes and eyebrows.

If added the seaweed directly onto the rice, the seaweed will shrivel. However I find that cutting out cheese to form the base for the seaweed infinitely cumbersome so I skipped that step. Cheese normally should be the base for any form of seaweed art so that the seaweed remains nice and flat instead of all crumpled and shriveled like it was in my bento T____TSo there it is. I cut out some flowers from an apple, added an egg and some chicken. Then I used a chunk of chilli for Shin Chan’s mouth. I suppose you could use ketchup or do it the professional way and use an egg sheet dyed red. Too much trouble to make the egg sheet for such a small area. Plus I like the spicy kick that the chilli lent. This is the second part of the bento. Just a compilation of the stuff I wanted to eat. Make sure that moist foods like fruits are separated from dry foods using rubber separators or in this case, leaves 😉 I wouldn’t want that egg tart to turn soggy!

I’d like to draw your attention to the apples. I saw these designs in a magazine but couldn’t understand how it was made so I freestyled it… basically I winged it.  I cut some apple chunks with the skin still on, in large cubes. Then I made four shallow cuts in the skin with a small knife, in the form of a hashtag # (I hope you understand what I’m bumbling on about, guess this is where a video would be much more educational than my incoherent words). Use the knife to gently peel off the skin slices in alternate blocks, leaving the skin on in some blocks so that it forms the design as shown. It is actually easier than it looks.

And there you have it, a Shin Chan bento. This was quick, delicious and fun to prepare. Definitely fun to eat as well 😉

WebRep

currentVote

noRating

noWeight

Panda bear sandwich and chick

Tags

bento, boiled egg, cheese, healthy, Kyaraben, lunch, lunchbox, panda, panda sandwich, quick meal, Sandwich

Just a quick picture post 😉

Kakashi Kyaraben

Tags

anime, bento, character bentos, cheese, food art, Home Cooking, japanese, Kakashi, kakashi bento, Kyaraben, naruto bento, seaweed art

Edit: Just updated the post with a couple of photos from the slr. Thought it would look a little nicer 😉

I’m really really behind on my posts! I’ve got sooooo much to blog about, but have been too busy travelling the past month.

Now to complete this post!

As always for seaweed art in bento making, you need the cutting board, cutter for intricate designs, a piece of paper, binding clips, paper, a slice of cheese, a large sheet of seaweed, a pencil, a pair of small sharp scissors and tweezers.

Firstly trace out the shape of your bento box onto the piece of paper. Then and only then do you start drawing/sketching your favorite character within the drawn boundaries. Something not too complicated, with simple and clear lines would be good. Otherwise you’d be snipping the life out of the seaweed!

Another tip. Try not to handle the seaweed with your bare hands as much as you can. The heat and moisture from your fingers will cause the seaweed to go limp and difficult to manage. Use the tweezers instead.

Once you’re done with the drawing, place the drawing on top of the seaweed and clip both drawing and seaweed to the cutting board. To ensure that the drawing doesnt move around while you’re cutting, ensure that the drawing is as close to the clipped area as possible. If you’ve left a lot of space between the drawing and the binding clips, it will make cutting a whole lot more difficult as the seaweed and paper are more prone to moving about and tearing.

Start cutting out the white bits! Start by cutting out the small white bits first. Once you’re done with the little tricky bits, you can then cut out the larger white bits. 

Here I’ve cut off the larger bit after completing the smaller parts. Of course, I couldn’t perfectly cut everything. I accidentally cut off the eye area but that’s ok. I can use another piece of seaweed to create another eye.

For the thinner lines such as the hair and the scar, it would be better to use the scissors rather than try to attempt to cut out fine lines using the cutter.

Fix on the thinner strips of seaweed onto the cheese to complete the character.

Lastly, trim the cheese if you prefer, and place as a decoration on top of your completed bento. I shan’t show my actual bento here because it was sloppy and simple. Just egg sandwiches that night.

Hopefully in my next bento attempt I’ll create something nice and cute! Something perhaps a little different from seaweed art.

Coming up soon: Kakashi kyaraben

Tags

anime bento, bento, food art, japanese, Kakashi, Kyaraben, lunchbox, naruto, seaweed art

Naruto kyaraben (character bento) with ikura

Tags

bento, character bento, foodart, ikura, japanese, Kyaraben, lunch, lunchbox, naruto, naruto bento, naruto character bento, naruto kyaraben, naruto seaweed art, sashimi

So for my next bento, I did a Naruto Kyaraben seaweed art. Again, I used the same tools as before but its easier this time around as the ingredients required for the seaweed art is only cheese and seaweed. I thought ikura would be perfect for giving him that volcanic bubbly nine-fox demon effect so I added that in as well. It helps that I love ikura 😉

Tools used are the same as before or maybe less… :  cutting mat, cutter for intricate designs, paper, pen/pencil, binding clips

So first, you draw an outline of your bento so you can draw your design within these boundaries. And then you draw your character, emphasizing on the black areas. You will cut out only the white bits. I think I shot myself in the foot by finding a drawing so intricate that it was difficult to cut the white bits properly T___T

Next, place the sketch over the seaweed on the cutting board, and clip paper and seaweed securely onto the board.

Start cutting the white bits. That is the cutter I used. I initially used a ceramic cutter but this is way easier. 

And continue the cutting while removing the seaweed bits at the same time. It will be easier to keep the board free of excess paper/seaweed moving around. 

You can see here that the patterns are starting to develop on the sheet of seaweed.

I suggest cutting the smaller bits first before you cut the large areas. This is because its easier this way and will result in less tearing of the seaweed. 

Almost done.

I put some rice into the bento, topped with seaweed and placed the slice of cheese where I wanted it. I’m not sure if it was a lucky mistake that I placed the cheese on the rice while it was still hot! So basically my cheese was warm and sticky such that anything that stuck to it cannot be removed! Therefore if you mess up the placement of the character here, its all ruined! On the bright side, the seaweed is more adhesive and very unlikely to fly away. 

Once you’ve stuck the seaweed character onto the cheese, build your bento! Ikura against a dark seaweed background lends a little mystery to the overall effect 😉 and the tiny yellow tomatoes were just there to contrast with the smaller ikura.

We’re done!

This bento is made for immediate consumption because there is no way you can put sashimi in a lunchbox and expect it to keep well in room temperature. Bacteria and all.

So yes, devour once you’re done with your pictures!

Time taken to complete: 1.5 hours